1) This product is a latex polymer compound. It is easy to disperse in cold water and is cationic.
2) This product can be used for surface sizing on paper added with a small amount of internal sizing agent or base paper without wet end chemicals (mainly for the papermaking of paperboard), and good sizing degree can be obtained.
3) The combination of CSE-1605 and aluminum sulfate can significantly improve the sizing effect.
4) This product has good compatibility with starch. It can obtain stable sizing effect for enzyme modified and ammonium persulfate modified starch systems.
5) CSE-1605 improves the stability of fine fibers and impurity ions separated from base paper, so that the sizing effect can be maintained under the condition of waste paper change.
6) This product has good stability to hard water, less foaming amount of coating liquid, and will not produce precipitates under the condition of high conductivity.
7) CSE-1605 has no problem of sizing and ripening. The sizing degree can be obtained immediately after sizing and drying.
8) In addition, the product can also be significantly improved in terms of warm water permeability, which can effectively prolong the warm water penetration time.
1.Physical indexes of CSE-1605
| CSE-1605 | |
| appearance | Light grey emulsion |
| Solid content | 30.0±1.0% |
| Product pH | 1.5～3.0 |
| Viscosity (25 ℃) | Below 50MPa. S |
2.Features of CSE-1605
1) This product is a latex polymer compound. It is easy to disperse in cold water and is cationic.
2) This product can be used for surface sizing on paper added with a small amount of internal sizing agent or base paper without wet end chemicals (mainly for the papermaking of paperboard), and good sizing degree can be obtained.
3) The combination of CSE-1605 and aluminum sulfate can significantly improve the sizing effect.
4) This product has good compatibility with starch. It can obtain stable sizing effect for enzyme modified and ammonium persulfate modified starch systems.
5) CSE-1605 improves the stability of fine fibers and impurity ions separated from base paper, so that the sizing effect can be maintained under the condition of waste paper change.
6) This product has good stability to hard water, less foaming amount of coating liquid, and will not produce precipitates under the condition of high conductivity.
7) CSE-1605 has no problem of sizing and ripening. The sizing degree can be obtained immediately after sizing and drying.
8) In addition, the product can also be significantly improved in terms of warm water permeability, which can effectively prolong the warm water penetration time.
3.Usage and precautions of CSR-1605
1) As the pH of the surface coating solution increases, the sizing effect will decrease, so please use it below pH 7.
2) The ionic property of CSE-1605 is cationic, so if it comes into contact with anionic drugs (especially anionic polyacrylamide surface paper force agent), flocs may be generated. Please avoid mixed use.
3) The product is also very stable when mixed with aluminum sulfate in the sizing solution. The use of aluminum sulfate in order to adjust the pH value of the sizing solution or clean the sizing system will not cause problems.
4) Although CSE-1605 has good hard water resistance stability, please use 2000 for starch gelatinization and dilution μ Clean water below s / cm.
5) The storage period of the product is 6 months. Please use it in time to avoid affecting the use effect.